The APAG05-2 an ideal linear amplifier at 2.4 GHz.
The APAG05-2 device is designed to work as a linear amplifier for data transfer over the CAT-5e cable, which at the same time also carries the supply voltage for the APAG05. This flexibility lets the APAG05-2 device be placed in a remote location very close to the antenna, so that signal losses are minimal.
The APAG05-2 device uses Time Division Duplex (TDD), a technology designed for power devices at 2.4 GHz in the ISM band. Applications in this band include systems for WLAN, Bluetooth, Point to Point (P2P) and Point to Multi-Point (P2MP) communication.
The APAG05-2 device increases coverage and stabilises the data rate of data transmitted as Direct Sequence Spread Spectrum (DSSS) in 802.11b, 802.11b+, 802.11g, 802.11n and 802.11b+g applications.
For Tx, it uses a high-efficiency linear amplifier, an MMIC built on a Gallium Arsenide Heterojunction Bipolar Transistor (HBT), so that it has very low current consumption and heat emission. The APAG05-2 amplifies the signal of any 802.11b/g/n device. This means that your Access Point or your wireless router can easily reach long distances using an external high-gain directional antenna and the necessary condition of line of sight between the two points. (Line of Sight)
 |
| Model | APAG05-2 |
| Frequency Band | 2.4GHz ~ 2.5GHz |
| Signal Type | OFDM&DSSS |
| TR Switch Time | <1μsec |
| Rx. Max Input Power | -10 dBm |
| Rx Power Gain | 20dB max |
| Tx Input Power | 5~20dBm |
| Tx Linear Output Power | 1W @ 11g 2W @ 11b |
| DC Supply Voltage | DC 12V / 1A |
| RF Connector Type | N Female |
| Operating Temperature | -10 ~ +40 °C |
| Storage Temperature | -40 ~ +90 °C |
Technical specifications
No posts found
